Category: Food

Why It’s Wise to Use an Inverter Generator for Your Food Truck

Kipor_IG2600h_Inverter-StromerzeugerRestaurants have established electricity for all their energy needs, but food trucks need electricity that they can take with them wherever they go. This is why they need generators. But conventional generators were so yesterday, and the new trend has arrived.

Inverter generators are favored by numerous mobile food vendors because they supplier smoother power, and they’re quiet and portable, even if they come at higher prices than standard ones.

Here are the reasons why it’s wise to use an inverter generator instead:
  • They have sufficient operation time in spite of their small size
  • They can adapt the speed of the engine based on the load needed
  • They can work parallel with multiple units
  • They are fuel-efficient
  • They are light and portable, making them easy to handle and store
  • They are quieter, and they vibrate less than conventional generators
  • They provide smoother electricity which makes them safer for delicate electronics like tablets, phones, and laptops
  • They use cutting-edge circuitry to convert multi-phase AC to DC then invert it back to “cleaner” AC
Types of Loads

You must know that there are two types of load. Resistive loads need the exact amount of energy to activate and get going. These include appliances that produce heat like coffee makers, light bulbs, toasters, and microwave ovens. On the other hand, reactive loads need more power to start out, but they use less energy once they’re running. These include devices that have an electric motor like blenders, bean grinders, air conditioners, and refrigerators.

How to Calculate the Power You Need

A generator—whether an inverter or a conventional one—can supply only a particular amount of power. This is why you have to ensure that the inverter generator you’ll buy can cover all the electricity your food truck requires.


One way to save money is to calculate how much energy your generator should have. This means you should know the total electricity requirements of the appliances you’ll be using in your truck. You can do this by looking for the stamp, data tag, or nameplate placed at the side or bottom of your appliances. You can also check the manual to determine the energy your machine needs.

Most of the required power is listed in amps, but most generators list their power outputs in watts. This is where a conversion is needed.

petrol-generator-inverter-hondaTo convert into watts, here’s the formula:

Volts x Amps = Watts

To convert into amps, use this formula:

Watts ÷ Volts = Amps

To make the calculation, add all the energy requirements of the machines you’ll use in your food truck. If the load is reactive, then measure using the starting wattage, which is usually three times more than the running wattage.


Using a Wood Router for Your Kitchen Cabinets the Right Way

If you check out the best wood routers out there, you’ll know why you must own one. A wood router can help you build another cabinet for your kitchen—because honestly, no one can have too much food in the kitchen. There’s absolutely no such thing.

Whether you’re cutting a dovetail or adding a profile to an edge, the wood router got you covered.

But before you start any project, you should know how to use a router first. Here are the five simple steps:

1: Install the router bit properly.


You should know that various bits will enable you to make different shapes to the edges of the wood. But regardless of how many router bits you own, if you don’t correctly install them into the collet of your wood router, they’ll be less of help and more of a disappointment. A router bit must be properly installed so it can cut the way you want it to. If you install it incorrectly, it could vibrate while in use and lead to a coarse profile or a mishap.

2: Secure the wood

There are two ways you can secure the material in position. The first one is by using a clamp. This method, however, can be annoying especially for beginners who aren’t used to the clamp. That’s because a clamp can be a hindrance to the wood router. It’s also time-consuming to use for a novice because it needs to be relocated in the middle of a task. The other method uses a router mat which can supply a good non-skid surface. This is a preferred method because you can just place the piece of wood on the mat and you won’t have to reposition it just like what you do with clamps. The only problem you might encounter is the mat may lose its grip at some point. When this happens, however, all you have to do is remove the dust on it by rinsing it with water.

3: Wear the appropriate attire

What’s your uniform? It consists of ear and eye protection, gloves, and sturdy shoes.

4: Go in the correct direction


Move your router counterclockwise if you’re routing the outside edge of your material, and go clockwise if you’re hollowing out the inside edge. Do it the right way to prevent your router from climb cutting and shifting away from you.

5: Know where to start

If you’re going to hollow out all four edges of a board, start from the end grain. Know that your router bit leaves this part, it may crack the edge next to it. When that happens, don’t fret—you can clean it up once you rout out that edge.

Now that you know how to use a wood router properly, you can start a project! Enjoy routing!

Powered by WordPress & Theme by Anders Norén